CNC & Laser Cutting
Profiles, cut-outs, holes and engraving from your DXF, DWG or STEP files — 22 machines, ±0.1 mm.
Anything more complex than a rectangle runs on our CNC centres. Profiles, internal cut-outs, counterbored holes, engraved detail and 3D contour work all come off the same drawing file you already have.
We hold ±0.1 mm, which is enough for panels that must drop into an existing frame without site adjustment.
CNC routing or laser cutting?
| CNC routing | Laser cutting | |
|---|---|---|
| Polycarbonate | Yes — the correct method | No — leaves a yellowed, brittle edge |
| Cast acrylic | Excellent | Yes, frosted edge |
| Extruded acrylic | Fair | Excellent — polished edge |
| Thick material | Up to 30 mm+ | Practical to about 20 mm |
| Fine detail | Limited by cutter diameter | Very fine |
The important line is the first one: polycarbonate should not be laser cut. The heat leaves a discoloured, stressed edge that cracks in service. Any supplier offering laser-cut polycarbonate is telling you something about their process control.
Typical applications
- Machine guard panels with cut-outs and fixings
- Display components and retail fixtures
- Engraved signage and control panel overlays
- Prototype and short-run production parts
- Gaskets, spacers and insulating components
Minimum order and lead time
This grade ships from 100 m² or 1 tonne — a trial pallet, not a full container. Standard sizes and stock colours run in 7–10 days; non-standard thickness or width in 12–18 days; add 3–7 days for CNC cut-to-size work. Quoted in USD on FOB, CIF or DDP terms. Full detail on the MOQ, lead time & shipping page.
Questions buyers ask
Which file formats do you accept?
DXF, DWG, STEP, IGES and PDF, up to 90 MB per file through the quote form. Vector geometry is preferred; we can work from a dimensioned PDF but it takes longer.
Can you engrave text and logos?
Yes, engraved or laser-marked depending on material and depth. Send the artwork as vector geometry for the cleanest result.
Do you offer polished edges on cut parts?
Yes — diamond polished for optical clarity, or flame polished on cast acrylic. Specify per edge, since polishing every edge on a hidden part is wasted cost.